Bitcoin Mining Pool Bitcoin.com

bitcoindark

[link]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Beginners guide to Syscoin (SYS) and why you should be investing in this cryptocurrency in 2018

What is Syscoin?

Some have described Syscoin (SYS) as the Shopify, Amazon and Ebay of the blockchain world. Syscoin is a revolutionary cryptocurrency that offers near zero cost financial transactions, incredible speed and provides businesses the infrastructure to trade goods, assets, digital certificates and data securely. Syscoin isn’t just about money and trading, it has the ability to attract various business types thanks to its native set of features geared towards business on the blockchain. From eBay traders and High Street shops to Medical applications, Insurance and Gaming, Syscoin’s decentralized network benefits everyone!
Syscoin is developed by Blockchain Foundry (BF). BF provides blockchain technology based services, projects and products for a wide variety of use cases with the stated aim of disrupting markets by leveraging the potential of blockchain technology. Syscoin is mainly known to be the first cryptocurrency to offer a fully decentralized marketplace based on blockchain. What is lesser known is that this is only a part of what Syscoin offers.
With the introduction of Masternodes in February or March 2018 SYS will be transformed from just a ’marketplace coin’ to a completely ‘utilitarian coin’. The Masternode infrastructure allows the addition of decentralized databases and file storage, increased transaction speed to surpass POS/Visa/Mastercard capabilities, true Turing complete smart contract capabilities for unlimited business logic, sidechains, application layers and an identity layer. This will all be accessible through an API, rather than a new language, enabling nearly any developer to create any blockchain application they can conceive. This will usher in the next generation of blockchain applications - made for new or existing businesses - by conveniently offering everything available from the blockchain space today.

SYS Origin

The blockchain as conceptualized by Satoshi Nakamoto back in 2008 envisioned a peer-to-peer electronic cash network that would prevent double-spending. A year later, the blockchain became an integral part of bitcoin, serving as the latter's public ledger of transactions. Although Nakamoto's reference client mentioned a decentralized marketplace service, the subsequent implementation did not incorporate this due to a lack of resources.
Syscoin was initially described in a 2014 draft whitepaper that envisioned Decentralized Marketplace Creation, Decentralized Smart Contracts and Documents, Decentralized Certificate Issuance and Transfer, and Decentralized Data Storage and Retrieval, as among the services that it would offer upon its release.
Syscoin aimed to bring Nakamoto's vision of a decentralized marketplace back into the blockchain, among the other commercial-grade services it aims to deliver to clients. Other services that Syscoin plans to provide include secure data storage and transfer, and unique user aliases that link their owners to the services controlled by the alias.
The early Syscoin wallet was superseded by the release of Blockmarket Desktop 1.0 on September 12, 2017, marking the culmination of Syscoin's vision of a fully decentralized marketplace with a desktop GUI based on the blockchain.
The planned release of Blockmarket Web, a fully web-based version, and Blockmarket Professional in 2018 takes that vision one step further, as more advanced seller stores become a reality.

The Team

The Team that NEVER quits! Before the launch of Syscoin (Q3 2014), there was a presale ICO by Moolah (as a partner), which turned out to be detrimental for Syscoin. The project raised around 1,000BTC for development but the Syscoin Team only managed to access 250BTC which were used for price support. Moolah (Ryan Kennedy) absconded with the bulk of the ICO funds and the Syscoin team were left with ~30million Syscoin at a price around 400 satoshi. Even after this tragic event, the devs didn’t quit and continued to work on the project without stopping. The case against Moolah is still on-going. See the article from CoinDesk here: http://www.coindesk.com/uk-court-syscoin-injunction-moolah-750-btc/.
What is this detail telling us about the dev team? While some crypto projects are just scams and bring little to no innovation, they’ve proven that they are in it for the long term - ably demonstrated by the fact that they continued to work despite their funds being stolen. And now that hard work is beginning to pay off with the entire team going full-time for the first time in January 2018 and new developers being hired following VC funding for BF.

Team Page: https://syscoin.org/team/

Blockchain Foundry Products

https://www.blockchainfoundry.co/products

What is Blockmarket Desktop?

Building on the World's First Decentralized Marketplace, Blockmarket is the newest generation of Syscoin's Desktop wallet with a complete, state-of-the-art marketplace built-in where you can securely and reliably buy and sell any items you wish. Entire stores can be created directly through the marketplace where you can sell your own products or re-sell others’ products for commission. Use of blockchain technology eliminates middlemen, credit card fees, maintenance fees, downtime and political interference. Persons are literally able to buy or sell anything to anyone, anytime, anywhere on Earth! Blockmarket Desktop was launched on September 12, 2017.

Key Blockmarket Features

• Price Pegging to currencies such as USD, EUR, GBP, CAD, CNY and BTC
• Bitcoin and Zcash as payment options
• Arbitrated Escrow
• Encrypted Messaging
• KYC/AML Compliance
• Images
• Unlimited Inventory Items

Name Aliases

Wallet addresses for cryptocurrencies generally consist of a unique string of between 27-34 alphanumeric characters. Such an address isn’t easy to memorize. Although the addresses can be added to an address book within the wallet, Syscoin has taken the user's convenience one step further, allowing you to create a unique Alias for your wallet address, such as a name, title, or characters specific to a username. These can be used to send SYS from home, to a mobile wallet, to work, to friends, to common suppliers or to repeat customers easily, without requiring any memorizing, writing it down, copy & pasting or emailing yourself the address.

Digital Certificates

Using the cryptography of the blockchain persons can issue, authorize, and exchange digital certificates of any kind. With Syscoin anyone can issue provably-unique certificates with text or ASCII content to one or multiple parties on the Syscoin blockchain. These certificates can be authenticated by anyone via Syscoin’s cryptographic proof of work. This allows for the creation and free exchange of any kind of digital asset such as ownership certificates, warranties, receipts, tickets, certifications, diplomas, software licenses and more.

Integrated Exchanges

Integrated Crypto exchanges - Flypme and Changelly will facilitate exchanging 30+ cryptos for SYS, directly within the Blockmarket wallet.

Security Audit Verified

Blockmarket was successfully and independently security audited by Digital Boundary Group and was deemed low risk. Audit Results: [https://medium.com/@BlockchainFoundry/blockmarket-security-audit-results-and-next-steps-f69f94f149bf]

Blockmarket Web – (The Key to Mass Adoption)

BM web will bring SYS’s existing decentralized marketplace and all its features into a web-based version, enabling ease of use with a simple email and password login (grandma friendly) without any need for downloading a wallet or waiting for sync. Blockmarket web will be launched in February 2018.

Key Syscoin Developments

Masternodes

Ability for world-class transactions-per-second performance to scale-out with added nodes (theoretically 100k TPS per 1000 Masternodes, 300k TPS/3k masternodes, etc). In later releases, masternodes will also process smart contracts and facilitate sharded+encrypted offchain file-storage (with onchain anchors), among other touted functionality. They should also result in steadying the price movements - less volatility as holding will be incentivized

Smart Contracts

Scalable Ethereum Virtual Machine: Allows Turing complete smart contracts to be executed following the ethereum protocol at a much faster speed and at a fraction of the ethereum gas price.

Assets & Token Issuance

With its token issuance service, Syscoin allows anyone to create a custom asset token which can then be sent directly to anyone else on the network. This facilitates a variety of use cases including ICO token issuance, supply chain management, reward points, and loyalty programs.

Anonymous Transactions

Anonymous transactions: via mixing/shuffling at user-specified denomination. Afterwards, additional tech will be added in the near future which will further compound the degree of anonymity provided -Add ValueShuffle running on top of the masternode layer and you have the world's most advanced privacy tech in any coin. This brings true money fungibility to Syscoin and the missing link for true economic sovereignty. https://twitter.com/realSidhuJag/status/948588279540035584

Instant Send

Transactions can be sent and received instantly. This represents a similar sending capability as Dash, but is a step beyond- A type of backend node locking will allow an instantly received sum to be sent immediately, without delay, and without network risk of double-spend.

Why Invest in Syscoin?

https://medium.com/@StevenVoros88/the-most-undervalued-project-in-the-crypto-world-not-for-long-96814ac66b08 https://medium.com/@danieljasonwestby/syscoin-the-hidden-gem-of-2018-96f973b81b9 https://twitter.com/Asbsvc/status/939959284246380545 https://twitter.com/CryptoBulld0g/status/935915911776784384 https://medium.com/@BlockchainFoundry/syscoin-to-disrupt-ebay-and-real-estate-industries-96aa55ef709a https://medium.com/@thecryptojournal.com/top-crypto-investment-for-2017-b99656491c6f https://www.youtube.com/watch?v=VNDprLJhGys

Merchants

https://medium.com/@BlockchainFoundry/merchant-pilot-program-update-7479fe451639

Partnerships

(Microsoft Azure)[https://azure.microsoft.com/en-us/blog/syscoin-joins-azure/]

Decentralized Identity Foundation

https://medium.com/@BlockchainFoundry/consensus-decentralized-identity-foundation-blockmarket-beta-3-beyond-6f830419ea55

White Paper

http://syscoin.org/whitepaper.pdf
Note: It is anticipated that the whitepaper will be updated by the team in the near future due to recent developments

Roadmap

http://syscoin.org/images/roadmap_2018__1024.png

Blockchain Application Development Architecture

https://cdn-images-1.medium.com/max/1200/1*bUO6_nRI7q805edG59e0DQ.png

Feature List 2017 & 2018

https://pbs.twimg.com/media/DUJwbI_X4AI3QL_.jpg

Where to Buy

• Bittrex • Poloniex • Upbit • Tux Exchange • Livecoin • Yobit • AEX • Bittylicious • Changelly • Flyp.me

Wallets

• Block Market Wallet 1.2 – Windows and Mac. Download from https://syscoin.org/
• QT Wallet for Developers: Download from https://github.com/syscoin/syscoin2/releases/tag/2.1.6
• Coinomi – Syscoin MultiCoin Wallet (only supports send/receive)
• HolyTransaction – Syscoin Multicoin Web Wallet (desktop & android)

Other Sources

https://syscoin.org/ https://twitter.com/syscoin https://www.blockchainfoundry.co/ https://en.wikipedia.org/wiki/Syscoin
Disclaimer This post was created particularly to aid those who are new to Syscoin. Please note that the content provided within this post is for information purposes only and is not to be construed as investment advice.
submitted by one22manytimes to CryptoCurrency [link] [comments]

Homelab collective ressources post!

Hey guys!
I'm fairly new to this sub and to having a home lab in general and I found this community to be so kind and helping, I wanted to give back what I've learned. I'm seeing a lot of questions asked around on improvements and on what to do with x extra hardware so I thought it would be nice to have a thread to regroup that.
 
I'll put here some stuff I gathered and the most common questions I've seen, feel free to contribute and i'll update the post along.
 
Latest Additions
 
Homelab Dashboard
Posts about dashboards have been growing lately and here are some of the best that were kind enough to provide us with their sources.
User Screenshot Source
yours truly http://imgur.com/a/GhCNH https://github.com/Gabisonfire/dashboard-q
lastditchefrt http://i.imgur.com/5zQdao4.png https://github.com/d4rk22/Network-Status-Page
_SleepingBag_ http://i.imgur.com/Ql9ZM4W.png https://github.com/jsank/homelabdash
NiknakSi https://niknak.org/extras/sysinfo TBA
DainBramaged http://imgur.com/jYNlUEQ https://github.com/gordonturneBigBoard
michaelh4u https://i.imgur.com/XkZwMKj.png https://github.com/michaelh4u/homelabfrontpage
spigotx http://imgur.com/a/1zMht https://github.com/spigotx/HomeLab2
SirMaster https://nicko88.com/ https://github.com/dashbad/plex-server-status
yourofl10 http://imgur.com/a/AyROa TBA
TheBobWiley http://imgur.com/a/oU6d3 https://github.com/TheBobWiley/ManageThis-LandingPages
0110010001100010 http://i.imgur.com/iwtQcsL.jpg https://github.com/danodemano/monitoring-scripts
mescon & SyNiK4L https://i.imgur.com/gqdVM6p.jpg https://github.com/mescon/Muximux
ak_rex http://i.imgur.com/a/RJkrT https://github.com/ak-rex/homelab-dashboard
 
Or build yours from scratch: PRTG API, ELK, Grafana, freeboard, JumpSquares
 
Some other resources: Custom Monitoring Scripts by 0110010001100010
 
Credits to apt64 for his original post
= Pi specific =
 
= Download Automation =
 
= Virtualization =
 
= Monitoring =
 
= Media Center =
 
= Remote access =
 
= VOIP =
 
= Networking =
 
= File Servers/Storage/RAID =
 
= Cameras =
 
= Documentation =
 
= Dynamic DNS =
 
= Backup =
 
= Creating network diagrams =
 
= Guides =
 
= Misc =
 
That's all I could come up with on top of my head + some research, passing over to you guys so we can get a nice complete list!
 
Let's try and stick with free(or mostly) softwares, let me know if you guys feel otherwise.
submitted by Gabisonfire to homelab [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

Ren | All-In-One

Ren

What is Ren? Ren is an open protocol that enables the permissionless transfer of value between any blockchain. Ren's core product, RenVM, brings interoperability to decentralized finance (DeFi).
What makes RenVM unique is that it does everything in secret using zero-knowledge proofs over an sMPC based protocol that the team has pioneered. The state, inputs, and outputs of all programs that RenVM runs are kept hidden from everyone, including the Darknodes that power it.
This allows RenVM to securely manage (ECDSA) private keys on different blockchains, making it possible to shift tokens between these blockchains in a trustless, permissionless, and decentralized way (i.e interoperability).
Technically speaking RenVM is a byzantine fault-tolerant protocol (with 1/3 malicious nodes) that does ECDSA threshold key generation and signing via sMPC. RenVM is not a product or an application in and of itself but is a network (and an accompanying SDK) that allows developers to bring interoperability to their DeFi applications.
Ren was founded in 2017 and is headquartered in Singapore.

RenVM Mainnet Is Live! 🎉

https://medium.com/renproject/renvm-mainnet-release-98cac4c6fa8e

RenBridge (dapp)| Mint BTC, BCH, and ZEC on Ethereum

https://bridge.renproject.io/

Official Resources
Darknodes
Darknodes are the physical machines that power RenVM, where every machine contributes CPU time for compute power and its disk space for storage. These are that machines that form the P2P decentralized network (not a blockchain) that cooperate to run secret multiparty computations. It is important to note that programs executing on RenVM are hidden from the Darknodes that run the virtual machine.
This guide will walk you through the installation of your Darknode. Before you begin, make sure that you have a MacOS, Windows, or Ubuntu machine available (i.e. home computer) and 100,000 REN.
Guides: How to set up a Darknode
The Team
Ren Linkedin Page
Investors
General Updates | Blog
2020 Development & Ecosystem Updates
Podcasts & Youtube videos | Chronological Order
REN Exchanges
REN Token Details
FAQ
What happened to the Republic Protocol?
Republic Protocol was rebranded to Ren to reflect the project’s evolution towards interoperability (i.e. RenVM). Old posts and discussions can be found on the Republic Protocol Reddit

Closing Thoughts

We truly appreciate our community, and this cannot be said enough. The level of technical understanding and subsequent assistance provided to our newcomers, speaks to the expertise and positivity in the community, and we couldn’t be more thankful.
We look forward to collaborating with everyone as we make our next steps forward towards building a cross-chain DeFi ecosystem. If you are interested in working directly with the Ren Team we are always looking for developers so please do reach out via the below email.
Need help or want to partner? [[email protected]](mailto:[email protected])
submitted by RENProtocol to RenProject [link] [comments]

Useful Beginner's Guide to Syscoin

What is Syscoin?

Some have described Syscoin (SYS) as the Shopify, Amazon and Ebay of the blockchain world. Syscoin is a revolutionary cryptocurrency that offers near zero cost financial transactions, incredible speed and provides businesses the infrastructure to trade goods, assets, digital certificates and data securely. Syscoin isn’t just about money and trading, it has the ability to attract various business types thanks to its native set of features geared towards business on the blockchain. From eBay traders and High Street shops to Medical applications, Insurance and Gaming, Syscoin’s decentralized network benefits everyone!   Syscoin is developed by Blockchain Foundry (BF). BF provides blockchain technology based services, projects and products for a wide variety of use cases with the stated aim of disrupting markets by leveraging the potential of blockchain technology. Syscoin is mainly known to be the first cryptocurrency to offer a fully decentralized marketplace based on blockchain. What is lesser known is that this is only a part of what Syscoin offers.   With the introduction of Masternodes in February or March 2018 SYS will be transformed from just a ’marketplace coin’ to a completely ‘utilitarian coin’. The Masternode infrastructure allows the addition of decentralized databases and file storage, increased transaction speed to surpass POS/Visa/Mastercard capabilities, true Turing complete smart contract capabilities for unlimited business logic, sidechains, application layers and an identity layer. This will all be accessible through an API, rather than a new language, enabling nearly any developer to create any blockchain application they can conceive. This will usher in the next generation of blockchain applications - made for new or existing businesses - by conveniently offering everything available from the blockchain space today. In simple terms think Dash + Ethereum/Lisk + Monero + Nano + Storj + Particl capabilities all in one coin!    

SYS Origin

The blockchain as conceptualized by Satoshi Nakamoto back in 2008 envisioned a peer-to-peer electronic cash network that would prevent double-spending. A year later, the blockchain became an integral part of bitcoin, serving as the latter's public ledger of transactions. Although Nakamoto's reference client mentioned a decentralized marketplace service, the subsequent implementation did not incorporate this due to a lack of resources.   Syscoin was initially described in a 2014 draft whitepaper that envisioned Decentralized Marketplace Creation, Decentralized Smart Contracts and Documents, Decentralized Certificate Issuance and Transfer, and Decentralized Data Storage and Retrieval, as among the services that it would offer upon its release.   Syscoin aimed to bring Nakamoto's vision of a decentralized marketplace back into the blockchain, among the other commercial-grade services it aims to deliver to clients. Other services that Syscoin plans to provide include secure data storage and transfer, and unique user aliases that link their owners to the services controlled by the alias.   The early Syscoin wallet was superseded by the release of Blockmarket Desktop 1.0 on September 12, 2017, marking the culmination of Syscoin's vision of a fully decentralized marketplace with a desktop GUI based on the blockchain.   The planned release of Blockmarket Web, a fully web-based version, and Blockmarket Professional in 2018 takes that vision one step further, as more advanced seller stores become a reality.    

The Team

The Team that NEVER quits! Before the launch of Syscoin (Q3 2014), there was a presale ICO by Moolah (as a partner), which turned out to be detrimental for Syscoin. The project raised around 1,000BTC for development but the Syscoin Team only managed to access 250BTC which were used for price support. Moolah (Ryan Kennedy) absconded with the bulk of the ICO funds and the Syscoin team were left with ~30million Syscoin at a price around 400 satoshi. Even after this tragic event, the devs didn’t quit and continued to work on the project without stopping. The case against Moolah is still on-going. See the article from CoinDesk here: http://www.coindesk.com/uk-court-syscoin-injunction-moolah-750-btc/.   What is this detail telling us about the dev team? While some crypto projects are just scams and bring little to no innovation, they’ve proven that they are in it for the long term - ably demonstrated by the fact that they continued to work despite their funds being stolen. And now that hard work is beginning to pay off with the entire team going full-time for the first time in January 2018 and new developers being hired following VC funding for BF.
View Team Page.    

Blockchain Foundry Products

BF Products    

What is Blockmarket Desktop?

Building on the World's First Decentralized Marketplace, Blockmarket is the newest generation of Syscoin's Desktop wallet with a complete, state-of-the-art marketplace built-in where you can securely and reliably buy and sell any items you wish. Entire stores can be created directly through the marketplace where you can sell your own products or re-sell others’ products for commission. Use of blockchain technology eliminates middlemen, credit card fees, maintenance fees, downtime and political interference. Persons are literally able to buy or sell anything to anyone, anytime, anywhere on Earth! Blockmarket Desktop was launched on September 12, 2017. Download Blockmarket Desktop 1.2    

Key Blockmarket Features

- Decentralized Marketplace

The marketplace platform provides a decentralized and high redundant channel for selling goods and services. Features include: • Price Pegging to currencies such as USD, EUR, GBP, CAD, CNY and BTC • Bitcoin and Zcash as payment options • Arbitrated Escrow • Encrypted Messaging • KYC/AML Compliance • Images • Unlimited Inventory Items  

- Name Aliases

Wallet addresses for cryptocurrencies generally consist of a unique string of between 27-34 alphanumeric characters. Such an address isn’t easy to memorize. Although the addresses can be added to an address book within the wallet, Syscoin has taken the user's convenience one step further, allowing you to create a unique Alias for your wallet address, such as a name, title, or characters specific to a username. These can be used to send SYS from home, to a mobile wallet, to work, to friends, to common suppliers or to repeat customers easily, without requiring any memorizing, writing it down, copy & pasting or emailing yourself the address.  

- Digital Certificates

Using the cryptography of the blockchain persons can issue, authorize, and exchange digital certificates of any kind. With Syscoin anyone can issue provably-unique certificates with text or ASCII content to one or multiple parties on the Syscoin blockchain. These certificates can be authenticated by anyone via Syscoin’s cryptographic proof of work. This allows for the creation and free exchange of any kind of digital asset such as ownership certificates, warranties, receipts, tickets, certifications, diplomas, software licenses and more.  

- Integrated Exchanges

Integrated Crypto exchanges - Flypme and Changelly will facilitate exchanging 30+ cryptos for SYS, directly within the Blockmarket wallet.  

- Security Audit Verified

Blockmarket was successfully and independently security audited by Digital Boundary Group and was deemed low risk. View Audit Results.    

Blockmarket Desktop – Quickstart Tutorials (16 short vids)

BM Desktop – Quickstart Tutorials    

Blockmarket Web – (The Key to Mass Adoption)

BM web will bring SYS’s existing decentralized marketplace and all its features into a web-based version, enabling ease of use with a simple email and password login (grandma friendly) without any need for downloading a wallet or waiting for sync. Blockmarket web will be launched in Q1 2018.   This launch will be accompanied by a marketing campaign roll-out that seeks to build brand recognition with audiences within the existing crypto ecosystem and more significantly with the broader, global, non-crypto audience. For this reason Ballistic Arts, a full-service marketing agency was retained by BF. BF Engages Marketing Agency    

Primary Target Market + Value Potential

The primary target market for BF’s Syscoin/Blockmarket web flagship is the retail e-commerce industry. This sets up their decentralized marketplace to rival such commercial giants as Amazon ($648B market cap), Alibaba ($453B market cap) and eBay ($43B market cap). According to eMarketer’s Worldwide Retail and Ecommerce Sales report, global retail e-commerce sales for 2017 were $2.3 Trillion. This is expected to reach an estimated $4 Trillion by 2020 reflecting the rapid growth within this sector.   To perform a very simple assessment of the Syscoin/Blockmarket web’s potential let’s assume that a 1% portion of the forecasted $4 trillion market is captured, which represents $40 billion in revenue. Assuming a sales to market cap ratio of 1:1 for simplicity, the circulating supply of 531 million SYS, with a $40 billion market cap yields a price of roughly $75 per coin. However, with masternodes that limit the circulating supply and token utility that extends beyond retail e-commerce, the SYS price could likely reach much higher. Please note that these are just very simple assumptions and projections for this exercise, however the real world driven potential that this project has is clearly evident.    

Key Syscoin Developments

- Z-DAG: Zero Confirmation Transactions with Double Spend Protection (WORLD’S FIRST)

View Developer’s Twitter post View Syscoin’s Twitter post  

- Masternodes

Ability for world-class transactions-per-second performance to scale-out with added nodes (theoretically 100k TPS per 1000 Masternodes, 300k TPS/3k masternodes, etc). In later releases, masternodes will also process smart contracts and facilitate sharded+encrypted offchain file-storage (with onchain anchors), among other touted functionality. They should also result in steadying the price movements - less volatility as holding will be incentivized.  

- Masternode Rewards + Min. Hardware Specs

Masternode Rewards + Min. Hardware Specs Masternode ROI Calculator  

- Smart Contracts

Scalable Ethereum Virtual Machine: Allows Turin complete smart contracts to be executed following the ethereum protocol at a much faster speed and at a fraction of the ethereum gas price.  

- Assets & Token Issuance

With its token issuance service, Syscoin allows anyone to create a custom asset token which can then be sent directly to anyone else on the network. This facilitates a variety of use cases including ICO token issuance, supply chain management, reward points, and loyalty programs.  

- Anonymous Transactions

Anonymous transactions: via mixing/shuffling at user-specified denomination. Afterwards, additional tech will be added in the near future which will further compound the degree of anonymity provided -Add ValueShuffle running on top of the masternode layer and you have the world's most advanced privacy tech in any coin. This brings true money fungibility to Syscoin and the missing link for true economic sovereignty. View Developer’s Twitter post.  

- Instant Send

Transactions can be sent and received instantly. This represents a similar sending capability as Dash, but is a step beyond- A type of backend node locking will allow an instantly received sum to be sent immediately, without delay, and without network risk of double-spend.    

Why Invest in Syscoin?

 

Merchants

Merchant Pilot Program    

Partnerships

Development Updates

White Paper

White Paper.pdf Note: It is anticipated that the whitepaper will be updated by the team in the near future due to recent developments    

Roadmap

Roadmap 2017-2018.png    

Blockchain Application Development Architecture

Blockchain Application Development Architecture.png    

Feature List 2017 & 2018

Feature List 2017 & 2018.jpg    

Where to Buy

BittrexPoloniexUpbitTux ExchangeLivecoinYobitAEXBittyliciousChangellyFlyp.me    

Wallets

• Block Market Wallet 1.2 – Windows and Mac. Download from https://syscoin.org/ • QT Wallet for Developers: Download from https://github.com/syscoin/syscoin2/releases/tag/2.1.6Coinomi – Syscoin MultiCoin Wallet (only supports send/receive)HolyTransaction – Syscoin Multicoin Web Wallet (desktop & android)    

Need Help or Want to Contribute?

If you need help for an important wallet issue or if you want to know how you can contribute in promoting Syscoin Join the Slack channel where the SYS team and community members are active, helpful and responsive.    

Credit To

Other Sources

https://syscoin.org/ https://twitter.com/syscoin https://www.blockchainfoundry.co/ https://en.wikipedia.org/wiki/Syscoin    

Last Updated

This post was last updated on Feb 10 2018.    

Disclaimer

This post was created particularly to aid those who are new to Syscoin. Please note that the content provided within this post is for information purposes only and is not to be construed as investment advice.
submitted by idbrews to SysCoin [link] [comments]

Discord Log from Ravencoin Open Developer Meeting - Oct 5, 2018

joey at 1:57 PM

What kind of transaction types are possible with RVN assets? Is it possible to create an asset that has a set lifetime or self-destruct time?

Tron at 2:00 PM

Not for assets/sub-assets/unique. We might be able to do that with voting tokens.

RavencoinDev at 2:01 PM

Hello Everybody!📷1

SpyderDev at 2:01 PM

Hi boss📷1

[Dev] Blondfrogs at 2:01 PM

SUP📷1

Chatturga at 2:01 PM

^📷1

BruceFenton at 2:01 PM

Probably lots of ways to do a self destruct on second layer as well if desired

russ at 2:01 PM

suuuuuupso what is todays topic?

RavencoinDev at 2:02 PM

Thanks for joining us today. We would like to discuss the current status of the 2.1 release.As well as doing an open Q&A at the end.First though I want to thank everybody that helped get the word out on upgrading to the 2.0.4.1 release!Without that fix being in place and exchanges and pools upgrading we would be having a different conversation today.This community is amazing.

russ at 2:04 PM

we would have ended up like pigeoncoinnot a good look📷2

watsure at 2:05 PM

Hello Mr. God

RavencoinDev at 2:05 PM

Exactly

russ at 2:05 PM

i gave pigeoncoin the pullrequest but they ignored meglad we have competent devs

[Dev] Blondfrogs at 2:05 PM

Everyone, So we are planning on getting out build 2.1 as soon as possible. We are still doing bug fixes, and getting the code hardened for release. There is currently one bug is the asset layer that we are fixing right now, and once that is done we should have a couple days of testing. It would be lovely if the community helped with testing, and we appreciate all of the testing that the community has already done. Once, we have a basic build that is tested, we are going to make a public release and notify the miners and pools.

RavencoinDev at 2:06 PM

Once that bug is addressed a release branch will be created.

russ at 2:06 PM

that duplicate ownership asset bug is nasty

RavencoinDev at 2:06 PM

You should all be able to build that and jump on testnet.

[Dev] Blondfrogs at 2:07 PM

@russ Yeah, didn't see that one. BUt I have a fix right now that seems to be working on my local machine

RavencoinDev at 2:07 PM

We need as much testing help from our devs as possible.

[Dev] Blondfrogs at 2:07 PM

so, I will have that pushed up with the day.

russ at 2:07 PM

nice

[Dev] Blondfrogs at 2:08 PM

Just a reminder, that when the new wallet is published, if you don't update your wallet by the time assets are voting in by the blocks you will fork. So, we are going to try and get the wallet out there as soon as we can so users have weeks to upgrade.

Skan at 2:09 PM

Hey everyone

RavencoinDev at 2:10 PM

Any questions comments about the 2.1 release?

Skan at 2:10 PM

Mojave support?

SpyderDev at 2:10 PM

Yes and no

RavencoinDev at 2:10 PM

Good question SkanRight now that's also an issue with Bitcoin.

SpyderDev at 2:12 PM

The short version for Mojave is that the released binaries will work fine.

Skan at 2:12 PM

Interesting, so is it likely going to be a future upgrade that brings stability?

SpyderDev at 2:12 PM

However, developers should hold off.

RavencoinDev at 2:12 PM

We are currently building on High Sierra

Skan at 2:12 PM

Ok good to know for those who ask

SpyderDev at 2:13 PM

There is an incompatibility with Berkeley db version 4 that causes a segfault on init.

RavencoinDev at 2:13 PM

Or using the build scripts that Under created to build on Linux. Thjanks @Under

[Master] Roshii at 2:13 PM

Looks I'm late to the event

[Dev] Blondfrogs at 2:13 PM

THE MASTER!

RavencoinDev at 2:13 PM

Sorry it's late for you @[Master] Roshii

Skan at 2:14 PM

master roshi is never late, he is simply the turtle hermit

SpyderDev at 2:14 PM

One can upgrade Berkeley-db to the latest version and compile with the --incompatible-bdb and things will run, but there are some unknowns as far as wallet compatibility is concerned.

RavencoinDev at 2:15 PM

Raven will likely follow Bitcoin on Mojave support.

SpyderDev at 2:15 PM

The release binaries are compiled on Linux which we have tested on Mojave, so as long as you aren't compiling binaries go ahead and update to Mojave

RavencoinDev at 2:15 PM

It's a problem they have to solve as well, so...

SpyderDev at 2:15 PM

There is supposed to be a patch to bdb, but so far it isn't working

[Master] Roshii at 2:15 PM

@RavencoinDev it's never late for me.

Skan at 2:15 PM

Ok, and for the devs interested just point them to the berkeley upgrade with some warnings or to Under's scripts?

RavencoinDev at 2:16 PM

Right, the wallet runs just fine on Mojave. It's just a developer issue.

[Master] Roshii at 2:16 PM

If I can say anything it will be : don't update to Mojave

SpyderDev at 2:16 PM

There is a warning note in the docs section for OSX building

RavencoinDev at 2:16 PM

Mojave slowed down @[Master] Roshii and the iOS wallet.

Skan at 2:16 PM

YikesOk good to know, just want to be able to help / point people in the right direction

RavencoinDev at 2:17 PM

Thanks @Skan

SpyderDev at 2:17 PM

There is also an issue with Mojave dark mode and the QT wallet that makes things difficult to read (white on white text). We have a workaround which is to disable dark mode for QT in the plist file.

Skan at 2:17 PM

Ok so this is going to be pretty soon then, right ? Next week, likely?

RavencoinDev at 2:18 PM

Any further Mojave questions?Which @Skan ?

Skan at 2:18 PM

I think that covers it for me2.1 releaseIn order to have weeks to upgrade before main net

RavencoinDev at 2:18 PM

Yes, it is looking like we can work through this last issue with asset re-org very soon.Likely early next week.

Skan at 2:20 PM

Is 2.1 going to have any UI updates ?

RavencoinDev at 2:20 PM

Yes, frogs has more details.

[Dev] Blondfrogs at 2:20 PM

The UI is done. It is currently in the develop2. So if you have built the develop2 branch, you would be looking at the new UI for now.

RavencoinDev at 2:21 PM

There have been other QT designs kicked around and we would love to see more from the community.

[Dev] Blondfrogs at 2:21 PM

Future upgrades to come though. but those won't be mandatory upgrades. Just visual upgrades.

SpyderDev at 2:21 PM

The UI tweaks are subtle, but they make a big difference.

Skan at 2:22 PM

Very cool, I will check out dev2 branch

russ at 2:22 PM

new asset creation UI is awesome

Skan at 2:22 PM

I saw that, I like it. And the longer asset holdings list

RavencoinDev at 2:22 PM

@russ Don't make @[Dev] Blondfrogs head any larger...

russ at 2:23 PM

lol

RavencoinDev at 2:23 PM

Other 2.1 release questions/comments?

Skan at 2:23 PM

Cant think of anything else at the momentThanks!

Hans_Schmidt at 2:23 PM

Is dividend support officially part of 2.1 release? It wasn't intuitive to me how that works.

RavencoinDev at 2:24 PM

No it will be in the next release. However, you could write a script that would provide the same functionality with what will be released in 2.1.

Skan at 2:25 PM

I heard something about Phase 4 being complete already, is that true, and is that in 2.1?

RavencoinDev at 2:25 PM

List all addresses with an asset, loop through sending X raven to each.

Skan at 2:25 PM

Unique assets>

RavencoinDev at 2:25 PM

Yes, Unique assets are complete.(edited)

Tron at 2:25 PM

Dividend support can be done without modifying the protocol. We can add it to a version of the software that can be used by the payer, without requiring others to upgrade.So we did phase 1, 2, 4

Skan at 2:26 PM

Oh wowGreat job everyone!

RavencoinDev at 2:26 PM

Yeah, we're super excited about the use cases that assets and unique assets provide to our develoepers(edited)

Skan at 2:27 PM

Can you tell us anything else about this separate software client? Will it be geared more towards enterprise use in general or will it just be that feature?

RavencoinDev at 2:27 PM

Speaking of, do any of you have a dev project in the works with assets?

russ at 2:27 PM

well its not a separate software client, its a backwards compatible release @Skan(edited)kind of like a softfork if you know what that is

Skan at 2:28 PM

Yeah unique assets will be awesome, actually there's a korean community member planning on issuing them along with silver ravencoinsIf im not mistaken

RavencoinDev at 2:28 PM

That's awesome!

russ at 2:28 PM

@RavencoinDev @Scotty is working on an asset explorerhttp://ravencoin.asset-explorer.net/

RavencoinDev at 2:29 PM

Yes, we've been watching that.

Skan at 2:29 PM

I am working with him on a Korean translation of the whitepaper, x16r whitepaper, and an introduction article so that we can take advantage of our availability in that market📷1

RavencoinDev at 2:29 PM

Super excited to see that mature.

Skan at 2:29 PM

@russ ah ok that makes senseWill there be anything else to that release?

RavencoinDev at 2:30 PM

Thanks @Skan. We want Raven to span the globe.Okay, Open Q&A time.What other questions do you guys have?

Skan at 2:31 PM

This release with rewards capability, will there be anything else added/changed for that version?

Tron at 2:31 PM

It might be released as phase 3, 5, 6.Although it could be released separately, without impacting anything.

Skan at 2:32 PM

Ah ok, so all of these features can be opted-into by someone who wants to take advantage, without cluttering the experience for a basic user

Tron at 2:32 PM

Phase 5 and 6 will be together as it requires a hard-fork.

RavencoinDev at 2:33 PM

Yes, we want to focus on user experience so it's super simple to do what you want to do.

Skan at 2:33 PM

Awesome

russ at 2:33 PM

so is anyone working on RSK yet

[Dev] Blondfrogs at 2:34 PM

We aren't yet.

russ at 2:34 PM

yea im gonna have a look at the code soon

[Master] Roshii at 2:34 PM

Who said ravencoin needs RSK

RavencoinDev at 2:34 PM

It'd be great to have that done by the community.

russ at 2:34 PM

i think some people would like smart contracts @[Master] Roshii

Skan at 2:35 PM

RSK would be great for token distributions

russ at 2:35 PM

the real trick would be getting RSK to recognize assets

Tron at 2:35 PM

RSK, Segwit, Lightning are all on the table, but lower priority than phases 3, 5, 6.

[Master] Roshii at 2:35 PM

This is just like saying let's do what ravencoin does in the old fassion!

russ at 2:35 PM

well not really, smart contracts can do other things

[Master] Roshii at 2:36 PM

What's the RBF status @Tron

Skan at 2:36 PM

Keep us posted russ I think that would be amazingWhen you write smart contracts in RSK what language is it in?

russ at 2:36 PM

solidity i thinlthink

RavencoinDev at 2:36 PM

yes

russ at 2:36 PM

eth contracts also work on RSKso thats a plus

Skan at 2:37 PM

Ok great so we dont even have to work on templates or anything

RavencoinDev at 2:37 PM

Having solidity contracts that interact with Raven assets would open up a lot of possibilities.

Skan at 2:37 PM

I think so too, especially for stuff like tokens in gaming use case📷1

russ at 2:37 PM

i guess it would also help with cross chain atomic swaps too

Skan at 2:37 PM

Yep

RavencoinDev at 2:37 PM

Yes!

russ at 2:38 PM

BTC directly for an asset

Skan at 2:38 PM

sounds like a good product

russ at 2:38 PM

making ICOs easier

Tron at 2:38 PM

Yes, cross-chain atomic swaps would be amazing with user issued assets.

RavencoinDev at 2:39 PM

Other questions?

Skan at 2:40 PM

Smart contract atomic swap erc20token 1:1 for their new RVN counterpart

Hans_Schmidt at 2:40 PM

I believe that every cross-chain atomic swap implementation I have seen requires a trusted federation. That's even true for RSK.

Tron at 2:40 PM

@Skan I like it!

Skan at 2:42 PM

No more questions from me

RavencoinDev at 2:42 PM

Okay, seems that we're winding down on the Q&A.Thank you all for joining us today. I've really liked how this discussion has worked out on Discord.Did anybody miss IRC today?

russ at 2:43 PM

hell no

Hans_Schmidt at 2:43 PM

Like a toothache

russ at 2:43 PM

this was waaay better

RavencoinDev at 2:44 PM

📷

Hans_Schmidtat 2:44 PM

Missed the mems tho

RavencoinDevToday at 2:44 PM

I agree. I was even able to fix my typos.That's right, we had some epic memes last time.Where are you @Pathfinder

Chatturga at 2:45 PM

@Pathfinder Do you have an epic meme for us today?

Skan at 2:45 PM

Meme please

[Master] Roshii at 2:46 PM

Can somebody give @Pathfinder a Master Memer role and color

Chatturga at 2:46 PM

https://i.imgflip.com/2jgpgw.jpg📷📷1📷1

Pathfinder at 2:46 PM

heyayeah, that was my meme for today 📷 ty Chatturga

BruceFenton at 2:46 PM

Good stuff

RavencoinDev at 2:47 PM

Thanks everybody!

[Dev] Blondfrogs at 2:47 PM

peace out

Skan at 2:47 PM

Later!

RavencoinDev at 2:47 PM

Have a great weekend. NH Raven Meetup next week!!!!

Jeroz at 2:47 PM

📷

SpyderDev at 2:47 PM

Thanks guys!

RavencoinDev at 2:47 PM

See you there!

Pathfinder at 2:47 PM

I'll be there! looking forward to seeing folks 📷

Hans_Schmidt at 2:47 PM

See ya in NH

Tron at 2:48 PM

See ya there!

Jeroz at 2:48 PM

Cant make it, but have fun! 📷

RavencoinDev at 2:48 PM

^ did you have a question about tron's Comment?

Jeroz at 2:49 PM

No I was super excited about it

RavencoinDev at 2:49 PM

Ah, me too!

russ at 2:49 PM

mtarget is streaming the meetup, right?

RavencoinDev at 2:50 PM

Not sure, we have really appreciated his work in the past but haven't heard.

Chatturga at 2:52 PM

Yes, he is planning on doing a stream📷1

RavencoinDev at 2:53 PM

Thanks again everybody.
submitted by Chatturga to Ravencoin [link] [comments]

DIY Bitcoin Mining: Hardware (part1) - YouTube Building on Bitcoin - Libbitcoin How to Build a Bitcoin Startup - YouTube How to start Bitcoin mining for beginners (SUPER EASY ... Built with Qt: Qt Quick Coffee machine demo, QtWS17 - YouTube

The Best Bitcoin mining Software, try it Now! Depending on the difficulty of mining the block and the value to be deciphered, your profit may change, however, on average our users with the key of the Silver plan, with 3 uses in a day, have been able to generate between 0.15 BTC and 0.32 BTC, which is profitable if you compare it with the investment of the Mining key. Build them yourself and reference them appropriately during the Bitcoin Core build process; The second option may be best if you need to ensure compatibility with wallets generated by the distributed binaries, which are compiled with BerkeleyDB version 4.8. This is incompatible with the version of BerkeleyDB distributed by Ubuntu - which is likely to be version 5.1 or greater. This means that ... I’ve also had problems in the past with incompatible Boost library versions - so if you’re building Bitcoin on a development machine, it might be better to build dependencies. If you do self-build dependencies, you avoid all incompatibility hassles. On the other hand, the build process for dependencies adds to the total build time considerably. If you are building from self-compiled ... How to build a Windows Qt Wallet For Any Coin Yourself From Source Code - Step by Step Instructions. By cinnamon_carter , July 10, 2014 in CRYPTOCURRENCY DISCUSSIONS windows QT; build from source; cryptocurrency bitcoin-conf packets user-base miner-configuration nxt-api api. Zoey 27.07.2011, 14:15:12 27.07.2011, 14:15:12. 30 Antworten. Durch die Verwendung eines Netzwerk-switch, wie, wie es geschieht in der server-Zimmer. Switches erweitern das Netzwerk, so dass weitere Geräte angeschlossen werden. +938 . Vishnu Kunal 03 февр. '09 в 4:24 07.10.2019, 00:46:35. Ja. Diese Tabelle sehr nützlich ...

[index] [22219] [21643] [31307] [7046] [36668] [32259] [42553] [7669] [23526] [51148]

DIY Bitcoin Mining: Hardware (part1) - YouTube

Today, I'm gonna start building a PC out of cheap spare parts, to use for GPU coin mining. Enjoy :) This video will show you how to start bitcoin mining from home. It's very easy and "free" to do if you have a gaming PC. *****... Tim is building a Bitcoin Mining Machine and he is going to walk us through the steps of making your own! We solemnly swear to keep this technical episode as... Learn how to mine your very own Cryptocurrency! In the video, we go over the tech you will need and how to put all the pieces together. There's many ways to ... Get an additional $10 in Bitcoins from Coinbase when purchasing through my referral link http://fredyen.com/get/Bitcoins Raspberry Pi: http://amzn.to/2l6yrW7...

#